Custom Shaped Bow Design 1 Flash (Pair)
When you have placed your order, please reply to the order confirmation with the photo of your bow and the measurements. (Up to 45" in length) All the bow designs will be custom-made to suit your boat bow, rather than having a one size fits all, we would rather do them so that it looks right and fills your bow correctly. As such we will need you to read the instructions below and once you have placed your order, email us the information and bow flash design choice and we will do the rest and send you a proof of the design imposed on your bow before printing. These easy-to-fit bow flash designs now come laminated to add protection to your graphics, prolonging that just new look. Please take a straight-on photo of the bow as in the image below.
Also, send some clear measurements with the start and end points clearly marked as in the image below. We can also do custom designs just let us know if you require anything different.
CANAL BOW DESIGN PAIR - DESIGN STYLE 1
Just send us an email when you have completed the above steps
All the bow designs will be custom-made to suit your boat bow, rather than having a one size fits all, we would rather do them so that it looks right and fills your bow correctly. As such we will need you to read the instructions below and once you have placed your order, email us the information and we will do the rest and send you a proof of the design imposed on your bow before printing.
If you require different colours to those shown on the product, then please, let us know
| Condition | New |
|---|---|
| Manufacturer | The Graphics Boat |
| Extended Description | Professional Grade - Comes sandwiched between a backing sheet and a application tape, Full fitting instructions will be provided, Weatherproof, Marine Safe after cured, Application Temperature Minimum 8 deg C, Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material, Freshly lacquered or painted surfaces should be allowed to dry for at least three weeks and to completely cure respectively, The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. |